Heavy Duty L Brackets For Wood Galvanised 2Mm Steel Corner Braces Angle Bracket 5061065493430
Heavy-duty 2.0mm gauge steel angle brackets for general-purpose 90 degree joints and reinforcement in timber and light structural framing. Each L-shaped bracket is described by its leg width (A x B, the two arms) and overall length (C), so the same style can serve as a compact corner gusset or a long reinforcing strip, depending on the size chosen.Made from pre-galvanised Z275 steel (DX51D + Z275), with a zinc coating of not less than 275g per square metre applied to both sides, about 20 microns thick, for reliable general-purpose corrosion resistance. The 5mm fixing holes are pre-punched at the factory, so the bracket can be offered straight up to the joint without drilling the bracket itself.Load data: characteristic load-carrying capacity (Pmax,k) of 14.8kN for a complete joint made with two brackets of this size, so the force per bracket is half of this value. Manufacturer's data, determined by tests or calculation for pressure loading, with timber of 350kg per cubic metre density and the brackets fixed to the manufacturer's nailing pattern.Specification:Size: 40 x 40 x 100mm (leg width A x B, overall length C)Material: 2.0mm gauge pre-galvanised Z275 steelFixing holes: 20 pre-punched, 5mmApprox. weight: 115g per bracketFixing: to timber with 4mm connector nails or 5mm Torx connector screwsFitting: hold the bracket in the internal or external corner with each leg flush against its face, mark the holes through the pre-punched pattern and fix to the timber with 4mm connector nails or 5mm Torx connector screws. For a longer joint, choose a longer bracket in the same leg width rather than fitting two short brackets end to end.Typical uses include shelving and furniture assembly, general timber framing, light structural bracing, workbench and rack construction, and fence and decking repairs. Fifteen sizes cover leg widths of 40mm, 60mm, 80mm and 100mm and lengths from 40mm to 200mm.
Price now:
From
ÂŁ21.98
To
ÂŁ29.28
Price History:
Details:Heavy Duty L Brackets For Wood Galvanised 2Mm Steel Corner Braces Angle Bracket 5061065493430
Heavy-duty 2.0mm gauge steel angle brackets for general-purpose 90 degree joints and reinforcement in timber and light structural framing. Each L-shaped bracket is described by its leg width (A x B, the two arms) and overall length (C), so the same style can serve as a compact corner gusset or a long reinforcing strip, depending on the size chosen.Made from pre-galvanised Z275 steel (DX51D + Z275), with a zinc coating of not less than 275g per square metre applied to both sides, about 20 microns thick, for reliable general-purpose corrosion resistance. The 5mm fixing holes are pre-punched at the factory, so the bracket can be offered straight up to the joint without drilling the bracket itself.Load data: characteristic load-carrying capacity (Pmax,k) of 14.8kN for a complete joint made with two brackets of this size, so the force per bracket is half of this value. Manufacturer's data, determined by tests or calculation for pressure loading, with timber of 350kg per cubic metre density and the brackets fixed to the manufacturer's nailing pattern.Specification:Size: 40 x 40 x 100mm (leg width A x B, overall length C)Material: 2.0mm gauge pre-galvanised Z275 steelFixing holes: 20 pre-punched, 5mmApprox. weight: 115g per bracketFixing: to timber with 4mm connector nails or 5mm Torx connector screwsFitting: hold the bracket in the internal or external corner with each leg flush against its face, mark the holes through the pre-punched pattern and fix to the timber with 4mm connector nails or 5mm Torx connector screws. For a longer joint, choose a longer bracket in the same leg width rather than fitting two short brackets end to end.Typical uses include shelving and furniture assembly, general timber framing, light structural bracing, workbench and rack construction, and fence and decking repairs. Fifteen sizes cover leg widths of 40mm, 60mm, 80mm and 100mm and lengths from 40mm to 200mm.
Price now:
From
ÂŁ21.98
To
ÂŁ29.28
This site contains affiliate links for which we may be compensated.
OnBuy.com
0.32% ( -ÂŁ0.07)
New
ÂŁ21.98
B&Q
3.90% (+ ÂŁ1.10)
New
ÂŁ29.28
Product Description
Heavy-duty 2.0mm gauge steel angle brackets for general-purpose 90 degree joints and reinforcement in timber and light structural framing. Each L-shaped bracket is described by its leg width (A x B, the two arms) and overall length (C), so the same style can serve as a compact corner gusset or a long reinforcing strip, depending on the size chosen.Made from pre-galvanised Z275 steel (DX51D + Z275), with a zinc coating of not less than 275g per square metre applied to both sides, about 20 microns thick, for reliable general-purpose corrosion resistance. The 5mm fixing holes are pre-punched at the factory, so the bracket can be offered straight up to the joint without drilling the bracket itself.Load data: characteristic load-carrying capacity (Pmax,k) of 14.8kN for a complete joint made with two brackets of this size, so the force per bracket is half of this value. Manufacturer's data, determined by tests or calculation for pressure loading, with timber of 350kg per cubic metre density and the brackets fixed to the manufacturer's nailing pattern.Specification:Size: 40 x 40 x 100mm (leg width A x B, overall length C)Material: 2.0mm gauge pre-galvanised Z275 steelFixing holes: 20 pre-punched, 5mmApprox. weight: 115g per bracketFixing: to timber with 4mm connector nails or 5mm Torx connector screwsFitting: hold the bracket in the internal or external corner with each leg flush against its face, mark the holes through the pre-punched pattern and fix to the timber with 4mm connector nails or 5mm Torx connector screws. For a longer joint, choose a longer bracket in the same leg width rather than fitting two short brackets end to end.Typical uses include shelving and furniture assembly, general timber framing, light structural bracing, workbench and rack construction, and fence and decking repairs. Fifteen sizes cover leg widths of 40mm, 60mm, 80mm and 100mm and lengths from 40mm to 200mm.
Product Specifications
General | |
|---|---|
Color | light |
Material | wood/steel |
Brand | DIYUK |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one thatâs most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a sellerâs listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.