Dynamode ADSL Filter/Splitter Broadband MicroFilter DSL
This filter is for UK broadband lines fitting in a standard BT plug socket and splitting the signal into Voice and Data providing a BT socket for a phone and an RJ11 socket for a ADSL modem. This item has been SIN 346 certified by BT. Other info For POTS voice band service the M-ADSL-Filter provides protection from ADSL signals which may impact through non-line or other remote devices (handset fax voice band modem etc) and central office operations. For ADSL signals it also provides protection from the high frequency transient and impedance effect that occur during POTS operations (ringing transients on-hook off-hook transient and so on). Because the POTS splitter in the M-ADSL-Filter connects directly to the subscriber loop media it also provides some protection for externally induced line hits or faults which could damage any attached equipment or endanger people interacting with the installed equipment. The circuit protection will be provided mostly by standard central office line protection means and additional protection measures built into the POTS splitter to protect against line overstress which could damage the splitter itself. Features: All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the selection from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As an objective the DC resistance should exceed 10 MW. A quality ADSL Broadband filter at a great price. Fully BT Labs t.
Price now:
From
ÂŁ3.25
To
ÂŁ4.42
Price History:
Details:Dynamode ADSL Filter/Splitter Broadband MicroFilter DSL
This filter is for UK broadband lines fitting in a standard BT plug socket and splitting the signal into Voice and Data providing a BT socket for a phone and an RJ11 socket for a ADSL modem. This item has been SIN 346 certified by BT. Other info For POTS voice band service the M-ADSL-Filter provides protection from ADSL signals which may impact through non-line or other remote devices (handset fax voice band modem etc) and central office operations. For ADSL signals it also provides protection from the high frequency transient and impedance effect that occur during POTS operations (ringing transients on-hook off-hook transient and so on). Because the POTS splitter in the M-ADSL-Filter connects directly to the subscriber loop media it also provides some protection for externally induced line hits or faults which could damage any attached equipment or endanger people interacting with the installed equipment. The circuit protection will be provided mostly by standard central office line protection means and additional protection measures built into the POTS splitter to protect against line overstress which could damage the splitter itself. Features: All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the selection from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As an objective the DC resistance should exceed 10 MW. A quality ADSL Broadband filter at a great price. Fully BT Labs t.
Price now:
From
ÂŁ3.25
To
ÂŁ4.42
This site contains affiliate links for which we may be compensated.
B&Q
25.62% ( -ÂŁ1.44)
New
ÂŁ4.18
Product Description
This filter is for UK broadband lines fitting in a standard BT plug socket and splitting the signal into Voice and Data providing a BT socket for a phone and an RJ11 socket for a ADSL modem. This item has been SIN 346 certified by BT. Other info For POTS voice band service the M-ADSL-Filter provides protection from ADSL signals which may impact through non-line or other remote devices (handset fax voice band modem etc) and central office operations. For ADSL signals it also provides protection from the high frequency transient and impedance effect that occur during POTS operations (ringing transients on-hook off-hook transient and so on). Because the POTS splitter in the M-ADSL-Filter connects directly to the subscriber loop media it also provides some protection for externally induced line hits or faults which could damage any attached equipment or endanger people interacting with the installed equipment. The circuit protection will be provided mostly by standard central office line protection means and additional protection measures built into the POTS splitter to protect against line overstress which could damage the splitter itself. Features: All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the selection from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As an objective the DC resistance should exceed 10 MW. A quality ADSL Broadband filter at a great price. Fully BT Labs t.
Product Specifications
General | |
|---|---|
Color | white |
colour | white |
connector a | rj-11 |
type | Filter |
Brand | Kenable |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one thatâs most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a sellerâs listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.